GeoVision Hardware Accessory

The GV-NET Card V3.1 is a RS-485 / RS-232 interface converter that can be installed inside a PC. It also supports connection via USB port.

The GV-NET/IO card provides 4 inputs and 4 relay outputs. It supports both DC and AC output voltages and provides a USB port as well.

With 12 digital inputs, the GV-IO 12-In Card is designed to work with the GV-NET/IO Card to provide an interface for your external devices such as sensors and detectors.

With 12 relay outputs, the GV-IO 12-Out Card is designed to work with GV-NET/IO Card to provide an interface for your external devices such as alarms and gates.

Interface: 2 x 40-pin connector Input Signal: 16 channels

The GV-Multi Quad Card is designed to alert security personel visually through 5 additional TV screen outputs including a main monitor and 4 other call monitors.

RS-232 / RS-485 data converter One additional RS-232/RS-485 COM port through USB USB powered device

The GV-Relay V2 is designed especially for driving higher voltage output devices, and it is controlled by other GV devices, such as GV-Video Server, GV-Compact DVR, GV-IP Camera, GV-DSP LPR, GV-I/O USB Box and GV-NET/IO Card V3.1.

Adds 4 RS-232 and 4 RS-485 serial ports

Programs and operates GV-systems Controls up to 16 additional GV-systems via RS-485 configuration

Operation Distance : 7 meters
Receiving Angle : -30 ~ 30 degrees
Frequency : 38 KHz
Power : R03 size AAA / 1.5V Battery x 2 units (Remote Control)

The GV-Joystick provides full control of the PTZ devices connected to the GV-System.

The GV-GPS Receiver can work with GV-Video Server and GV-Compact DVR to perform GPS vehicle tracking.